Appendix B Specifications - Powercom 800VA User Manual

A S
PPENDIX B PECIFICATIONS
MODEL
INPUT Capacity
Voltage
Frequency
OUTPUT Voltage (on battery)
Frequency (on
battery)
Voltage Regulation
(AVR)
Transfer Time
PROTECTION Spike Protection
And FILTERING
EMI/RFI filter
Overload Protection
Unit Input
10Base-T Cable Port
Short Circuit
BATTERY Type
Typical Recharge
Time
Protection
Back-up Time
PHYSICAL Net Weight Kg (lbs)
Shipping Weight Kg
(lbs)
Dimension (mm)
W*D*H
ALARM Battery Back-up
Battery Low
Overload
INTERFACE Dry Contact ( DB9 )
Interface
RS-232C Interface
ENVIRONMENT Ambient Operation
Audible Noise
Storage Condition
800VA 1000VA
(On Battery) 800VA 1000VA
/480W /600W
(Spike 500VA 500VA
protection)
50 or 60 Hz +/-10% (auto sensing)
Simulated sine wave at 100V/115V/230V +/- 5%
50 or 60 Hz +/- 0.5%
AVR automatically increase output voltage 15%
above input voltage if –9% to –25% of nominal.
AVR decrease output voltage 13% below input
voltage if +9% to +25% of nominal
2/4 milliseconds, including detection time
10Db at 0.15MHz, 50Db at 30MHz
UPS automatic shutdown if overload exceeds
110% of nominal at 60 seconds and 130% at 3
Circuit Circuit
Breaker Breaker
For overload & Short circuit protection
Network (UTP,RJ-45) compatible jacks
UPS output cut off immediately or input fuse
Sealed, Maintenance-free lead acid
4 hours (to 90% of full capacity)
Automatic self-test & discharge protection,
Replace battery indicator
3– 180 min (depending on computer load)
13 (28.6) 15 (33.0)
14.2
(31.2)
Slow beeping sound (about 0.47Hz)
Rapid beeping sound (about 1.824Hz)
Continue beeping sound
YES
YES
3,500 meters max. elevation, 0-95% humidity
non-condensing, 0-40 deg C
< 40dBA (1 meter from surface)
10
1200VA 1500VA
1200VA 1500VA
/720W /900W
500VA 500VA for
220-240V
only.
+/-25% at line input
320 Joules, 2ms
seconds
Circuit Circuit
Breaker Breaker
protection
15.2 (33.4) 15.6 (34.3)
16.2 16.4 16.8
(35.6) (36.1) (37)
130*382*201
(5.1"*15"*7.9")
YES YES YES
YES YES YES
15000 meter max.