Feeding/Drive System; Outline - Canon FINISHER - D1 Service Manual

CHAPTER 2 OPERATIONS
II . FEEDING/DRIVE SYSTEM
A.

Outline

The machine operates in response to commands from its host copier for simple stacking, job
offset, or stapling and deliver the sheets to the delivery tray.
The copier is equipped with two delivery trays: the top tray is the non-sort tray (tray A), and is
used for simple stacking; the bottom tray is the sort tray, and is used for stapling and job offset and the
sheets are delivered to the sort tray (tray B).
Delivery
2-14
COPYRIGHT © 1999 CANON INC.
Sort delivery
(tray B)
Non-sort delivery
(tray A)
Figure 2-201
CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Simple stacking
Job offset
1-point stapling (front)
Stapling
1-point stapling (rear)
2-point stapling
Simple stacking
Interrupt delivery