Canon FINISHER - D1 Service Manual page 111

B. Moving Down the Tray B
UNIT
1) Remove tray B (four screws).
2) While holding down the frame of the tray
[1], release the clutch [2] with a screw-
driver.
3) While keeping the clutch released, move
down the tray B unit.
Reference:
You may insert a screwdriver through the
long hole [3] in the back of the tray B unit
frame to release the clutch.
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 MECHANICAL SYSTEM
[2]
Figure 3-304
[3]
Figure 3-305
[1]
3-23