Specifications - Canon FINISHER - D1 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
II . SPECIFICATIONS
A.

Specifications

1. Type
Item
Fixed type
Stacking
Stack size
Paper weight
Modes
Stack Non-staple
sort
thickness
Staple sort
Staple/non-staple
mix
Stacking
Paper detection
Control panel
Display
Installation
Dimensions
Weight
Power supply
Maximum power
consumption
Note 1: The term "small-size" refers to A4, A5, B5, postcard, LTR, and STMT, while the term
"large-size" refers to A3, B4, LDR, and LGL.
1-2
COPYRIGHT © 1999 CANON INC.

Specifications

Fixed
Tray A
Mobile type
Tray B
Tray A
Same as the copier's delivery method.
Tray B
Face-down
Tray A
Postcard to A3/LDR
Tray B
A5/STMT to A3 /LDR
64 to 200g/m 2
Staple stacking, non-staple stacking
Tray A 250 sheets (small-/large-size)
2,000 sheets (small-size)
Tray B
1,000 sheets (large-size)
Tray A Not possible
2,000-sheet equivalent or 100 sets
Tray B
(small-size)
1,000-sheet equivalent or 100 sets
(large-size)
Possible with conditions
No offset
Tray A
Front/rear stack offset
Tray B
Staple: 20 mm offset
Non-staple: 30 mm offset
(offset on the internal processing tray)
Non-sort tray No
Sort tray Yes
No
No
Latching with mount (height adjusted by caster)
665mm (W) ×708mm (D) ×995mm (H)
65kg
100 to 120V/50; 60Hz, 230V/50Hz
350W or less
Table 1-201
CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Postcards are for R
feeding only.
A5/STMT is for R
feeding only.
Paper of 80 g/m 2 .