Knurled Belt; Knurled Belt Releasing Unit - Canon FINISHER - D1 Service Manual

CHAPTER 3 MECHANICAL SYSTEM
IV . KNURLED BELT
RELEASING UNIT
A. Releasing the Knurled
Belt Releasing Unit
1) Release the machine from the copier.
2) Disconnect J19 [1] and J18 [2].
3) Remove the three screws [3].
4) While detaching the knurled belt [4] from
the pulley, detach the knurled belt releas-
ing unit.
3-28
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[1]
Figure 3-401
[3]
Figure 3-402
[4]
Figure 3-403