Canon FINISHER - D1 Service Manual page 52

CHAPTER 2 OPERATIONS
d. Stack Delivery
A stack is delivered when as many as five (three in the case of large-size sheets) have been
deposited on the processing tray.
The swing guide motor rotates to move down the swing guide. The upper and lower stack
delivery rollers then hold the stack in between. When the stack delivery motor starts to rotate, the
stack held between the delivery rollers is discharged; at the same time, the tray auxiliary plate is
retracted inside the machine.
The sheet coming from the copier to the finisher while the stack is being discharged is wrapped
around the buffer roller.
2-26
COPYRIGHT © 1999 CANON INC.
Swing guide
Figure 2-216
CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)