Feeding/Delivery - Canon FINISHER - D1 Service Manual

B.

Feeding/Delivery

1. Outline
The machine sends sheets from the copier to its tray A or tray B according to the selected mode
of delivery, and performs job offset or stapling in response to commands from the copier.
The following table shows the motors used to feed or align sheets. These motors are controlled to
rotate clockwise or counterclockwise as instructed by the finisher controller PCB.
The paper path is equipped by various sensors as shown, monitoring the arrival or passage of
paper.
If paper fails to reach or move past a specific sensor within a specific period of time, the finisher
controller PCB will identify the condition as a jam, stopping operation and informing the copier of
the condition.
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 OPERATIONS
2-19