Operating The Finisher; Removing Jams From The Finisher; Removing Jams From The Finisher - Canon FINISHER - D1 Service Manual

III . OPERATING THE
FINISHER
A. Removing Jams from the
Finisher
If the Jam indicator turns on, perform the
following:
1) Remove the paper visible from the out-
side.
2) Open the front cover.
3) Open the upper cover, and check the in-
side of the finisher.
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPTION
Figure 1-301
Figure 1-302
Figure 1-303
1-5