Canon FINISHER - D1 Service Manual page 103

B. Removing the Paddle
Unit
1) While lifting the swing guide, remove the
screw [1]; then, detach the paddle unit [2].
Reference:
After removing the processing tray, you
may detach the paddle unit from behind
the processing tray unit.
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 MECHANICAL SYSTEM
[2] [1]
Figure 3-204
3-15