Chapter 1 General Description; Features - Canon FINISHER - D1 Service Manual

I . FEATURES
1. Two Types of Stacking Trays
• The delivery tray (tray B) is designed for stapling and job offset delivery, while the interrupt
tray (tray A) is designed for ordinary delivery.
2. Large Capacity
• Tray B is capable of holding 2000 sheets, while tray A is capable of holding 250 sheets, a total
of 2250 sheets.
3. Wide-Ranging Paper Types
• The sheets may be of 64 to 200 g/m
4. Stack Job Offset Function
• The stack job offset function is offered for sorting non-staple stacks.
5. Three Types of Auto Stapling
• As many as three different types (position) are offered (front slant, rear slant, 2-point).
6. High Productivity by a Buffer Roller
• The use of a buffer roller has enabled continuous feeding of sheets from the copier while
stapling or offset operation is taking place.
COPYRIGHT © 1999 CANON INC.
2
paper.
CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

CHAPTER 1 GENERAL DESCRIPTION

1-1