Advertisement
Step 40: Attach Elbow Assemblies and TNR4 Slide
A: Place 1 TNR4 Post Mount Clamp on either side of the Clamp Ring so that the bent tops clip in behind the
Clamp Ring. (fig. 40.1 & 40.2)
B: Insert the TNR4 Post Mount Base in between the 2 Post Mount Clamps and screw all pieces together using 1
¼ x 14.5mm Pan Head Bolt and Square Nylock Nut. (fig. 40.2)
C: Attach TNR4 Post Mount Base to (9493) Groud Brace C, pre-drill with a 1/8" drill bit then attach with 2 (S6) #12
x 1" Pan Screws. (fig. 40.2)
D: Attach the Post Mount Clamp to the clamp ring using 1 (S37) #7 x 5/8" Pan Screw. (fig. 40.2)
Fig. 40.1
Fig. 40.2
¼ x 14.5mm
Pan Head Bolt
TNR4 Post
Mount Base
S6
Hardware
2 x
#12 x 1" Pan Screw
S6
1 x
#7 x 5/8" Pan Screw
S37
parts.kidkraft.com
76
TNR4 Post
Mount Clamp
S37
100
Other Parts
2 x TNR4 Post Mount Clamp
1 x TNR 4 Post Mount Base
1 x 1/4 x 14.5 mm Pan Head Bolt
1 x Square Lock Nut
customerservice@kidkraft.com
1.800.933.0771
972.385.0100
Square
Lock
Nut
9493
Advertisement
