Advertisement
Step 28: Large Roof Panel Assembly
Part 2
Important: Do not over tighten hardware
E: Slide 1124 x 1067mm Roof Panel under (9520) Roof Cover so that it's tight to (9504) Roof Sleeper Left. (Fig.
28.5 & 28.6 & 28.9)
F: Place 370 x 1067mm Roof Panel in the remaining opening, under (9520) Roof Cover. The inside edge should
overlap the Large Roof panel with the pre-drilled holes lining up. (Fig. 28.5 & 28.6 & 28.9)
G: Pre-drill all holes using a 1/8" drill bit, place Special Weather Cap brackets over each hole in the Roof Panels
then attach using 1 (S20) #8 x 1-3/8" Wood Screw per bracket. Press the Special Weather Cap over the top of
each screw.(Fig. 28.7 & 28.8 & 28.9)
Fig. 28.5
9504
Large
Roof
Fig. 28.6
1"
(25.4mm)
The side with the
arrow facing up
9520
Small Roof
Fig. 28.7
S20
Hardware
10 x
#8 x 1-3/8" Wood Screw
S20
parts.kidkraft.com
62
S20
Fig. 28.9
Special
Weather
Caps
Special
Weather
Caps
1 x 1124 x 1067mm Roof Panel
1 x 370 x 1067mm Roof Panel
10 x Special Weather Caps
x 10
9520
Fig. 28.8
S20
Other Parts
customerservice@kidkraft.com
1.800.933.0771
972.385.0100
Advertisement
