Advertisement
Step 7: Counter Assembly
Part 1
A: Flush to each end and to the bottom of (9473) Counter Back attach 1 (9471) Counter Joist per end with 1 (S20)
#8 x 1-3/8" Wood Screw per joist. Notice the holes at the top of (9473) Counter Back. (fig. 7.1 & 7.2)
B: Place the remaining 2 (9471) Counter Joists centered over the pilot holes in the middle of (7613) Counter Back
and flush to the bottom of the board. Attach in the bottom holes using 1 (S20) #8 x 1-3/8" Wood Screw per joist.
(fig. 7.1 & 7.2).
C: Place (9472) Counter Front against (9471) Counter Joists so the ends are flush and the (9471) Counter Joists
are centered over the pilot holes. Measure 5/8" (16mm) down from the top of (9472) Counter Front on both ends
and attach to the (9471) Counter Joists with 4 (S20) #8 x 1-3/8" Wood Screws. (fig. 7.1 & 7.2)
Fig. 7.1
9472
Wood Parts
4 x
Counter Joist 1 x 2 x 8 1/4"
9471
1 x
Counter Front 9/16 x 2 3/4 x 32 3/16"
9472
1 x
Counter Back 9/16 x 3 1/4 x 32 3/16"
9473
europecustomerservice@kidkraft.com
+31 20 305 8620
M-F from 09:00 to 17:30 (GMT+1)
S20
9473
9471
Fig. 7.2
9472
Hardware
8 x
#8 x 1-3/8" Wood Screw
S20
parts.kidkraft.eu
31
x 4 per side
5/8"
(16mm)
9471
9473
Flush
Advertisement
