Advertisement
Step 24: Attach Hand Grips to Fort
Note: Pre-drill all holes using a 1/8" drill bit before installing the Wafer Lags
A: Measure 6" up from the top of the Rockwall and center 1 Hand Grip on each side. Pre-drill, then attach Hand
Grips with 2 (WL3) 1/4 x 1- 3/8" Wafer Lags (with flat washer) per Hand Grip. (fig. 24.1 and 24.3)
B: Measure 6" up from the Access Ladder and place 2 more Hand Grips so they are flush to the edges of the
opening. Pre-drill, then attach using 2 (WL3) 1/4 x 1-3/8" Wafer Lags (with flat washer) per Hand Grip. (fig. 24.2
and 24.3)
Fig. 24.1
Hand Grips
Hand Grips
6" (152.4mm)
Fig. 24.2
WL3
6" (152.4mm)
Hardware
8 x
1/4 x 1-3/8" Wafer Lag (1/4" Flat Washer)
WL3
parts.kidkraft.com
56
Fig. 24.3
1/4" Flat
Washer
WL3
1/4" Flat
WL3
Washer
Other Parts
4 x Hand Grips
customerservice@kidkraft.com
1.800.933.0771
972.385.0100
Advertisement
