Advertisement
Step 29: Small Roof Panel Assembly
Part 2
Important: Do not over tighten hardware
E: Slide 1124 x 650mm Roof Panel under (9512) Roof Cover so that it's tight to (9508) Roof Sleeper. (fig.29.6 &
29.7 & 29.10)
F: Place 370 x 650mm Roof Panel in the remaining opening, under (9512) Roof Cover. The inside edge should
overlap the Large Roof panel with the pre-drilled holes lining up. (fig. 29.6 & 29.7 & 29.10)
G: Pre-drill each hole using a 1/8" drill bit, place Special Weather Cap brackets over each hole in the Roof Panels
then attach using 1 (S20) #8 x 1-3/8" Wood Screw per bracket. Press the Special Weather Cap over the top of
each screw. (fig. 29.8 & 29.9 & 29.10)
Fig. 29.6
The side with the
arrow facing up
Large
Roof
9508
Fig. 29.7
1"
(25.4mm)
9512
Small
Roof
Special
Weather
Caps
10 x
parts.kidkraft.com
Fig. 29.10
9508
Fig. 29.8
S20
Hardware
#8 x 1-3/8" Wood Screw
S20
64
9512
Fig. 29.9
S20
add to pg 63 of V6
Other Parts
1 x 1124 x 650mm Roof Panel
1 x 370 x 650 Roof Panel
10 x Special Weather Caps
customerservice@kidkraft.com
1.800.933.0771
972.385.0100
x 10
S20
Special
Weather
Caps
Advertisement
