Step 3: Join Frame Assemblies
Part 2
C: Place 1 (9460) Floor Joist along the bottom of the front and back walls so they are flush to the bottom. Check
to make sure that the joists are level then attach each joist using 5 (S7) #12 x 2" Pan Screws. (fig.3.4, 3.5 and 3.7)
D: Place 1 (9461) Floor Joist Short along each end wall, between the (9460) Floor Joists. Check to make sure
they are level and flush to the bottom, then attach using 4 (S7) #12 x 2" Pan Screws per side. (fig. 3.4, 3.6 and
3.8)
Fig. 3.4
Fig. 3.7
S7
x 10
9460
Bottom View
Wood Parts
2 x
Floor Joist 1 1/4 x 1 1/2 x 53 7/16"
9460
2 x
Floor Joist Short 1 x 1 1/2 x 31 11/16"
9461
Fig. 3.8
S7
x 8
9461
Bottom View
Hardware
18 x
#12 x 2" Pan Screw
S7
parts.kidkraft.com
20
Fig. 3.5
Flush
Note hole orientation in Fig. 3.7,
3 screws into large panel and 2
into the small panel.
Fig. 3.6
9461
customerservice@kidkraft.com
1.800.933.0771
972.385.0100
9460
Flush