Advertisement
Step 32: Slide Section Assemblies
Part 1
Note: When installing Pan Bolts make sure to look at holes so bolts go through the side with the
round recess and the lock nuts go through the side with the hexagonal recess. (fig. 32.3)
A: Fit 2 TNR2 Slide Elbows together and attach with 8 (PB1) 1/4 x 3/4" Pan Bolts (with lock nut) as shown in
fig. 32.1. It is very important to attach bolts as indicated.
B: Repeat Step A 3 more times to create 4 Elbow Sections in total.
C: Attach TNR3 Extended RT Flange and TNR3 Extended LT Flange together using 9 (PB1) 1/4 x 3/4" Pan
Bolts (with lock nut) as shown in fig. 32.2. This creates the Flange Assembly.
Fig. 32.1
Lock
Nut
PB1
Lock
Nut
Use a 7/16" open end
wrench for nuts
europecustomerservice@kidkraft.com
+31 20 305 8620
M-F from 09:00 to 17:30 (GMT+1)
TNR2
Slide
Elbow
TNR2
Slide
Elbow
Fig. 32.3
PB1
41 x
Fig. 32.2
Lock
Nut
Flange
Assembly
PB1
PB1
x 4
Hardware
1/4 x 3/4" Pan Bolt
PB1
(1/4" lock nut)
parts.kidkraft.eu
67
TNR3
Extend
Flange LT
TNR3
Extend
Flange RT
Lock
Nut
Other Parts
1 x TNR3 Extend Flange RT
1 x TNR3 Extend Flange LT
8 x TNR2 Slide Elbow
Lock
Nut
PB1
Advertisement
