Advertisement
Step 10: Crowsnest Assembly
A: Lay flat 2 (9494) Crowsnest Uprights taking note of the hole orientation. Place 2 (9499A) Crowsnest Bottoms
over the top two sets of pre-drilled holes as shown in ( Fig.10.1). Attach using 2 (H3) 1/4 x 2-1/2" Hex Bolts (with
flat washer, lock washer and t-nut) per board. (Fig. 10.1)
B: Place (9499) Crowsnest Bottom over the bottom set of pre-drilled holes, attach using 2 (H3) 1/4 x 2-1/2" Hex
Bolts (with lock washer, flat washer and t-nut). (Fig. 10.1)
Fig. 10.1
1/4" Lock
Washer
1/4" Flat
Washer
1/4"
T-Nut
Wood Parts
1 x
Crowsnest Bottom 1 1/4 x 2 1/2 x 57 7/16"
9499
2 x
Crowsnest Bottom 1 1/4 x 2 1/2 x 57 7/16"
9499A
2 x
Crowsnest Upright 1 1/4 x 2 1/2 x 90"
9494
H3
9499A
6 x
parts.kidkraft.com
H3
1/4"
T-Nut
9499
Hardware
1/4 x 2-1/2" Hex Bolt
H3
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
38
1/4" Lock
Washer
1/4" Flat
Washer
9494
customerservice@kidkraft.com
1.800.933.0771
972.385.0100
Advertisement
