Unlocking The Scanner - Microtek ScanMaker 1000XL Plus User Manual

Before you can operate the scanner, you will need to unlock the scanner. To unlock
the scanner, follow the steps below:
1. Remove the yellow "Step 3" sticker
2. Look for the unlocking screw at the
3. Using a screwdriver, push and turn
Shipping the Scanner
If you have to transport the scanner, you will need to lock the scanner back. Follow
the steps below:
1. Turn off the scanner if your
2. Turn the scanner back on. The
3. When the indicators on the front
4. Turn off your scanner. The scanner is now ready for transport.
4 ScanMaker 1000XL Plus User Guide

Unlocking the Scanner

from your scanner.
bottom of the scanner.
the locking screw counterclockwise
to the unlock position.
When successfully unlocked,
the screw will push out a little,
protruding slightly from the bottom
of the scanner.
scanner is on.
scanner's carriage will move to
the standby position in a few
moments.
of your scanner stop blinking, use
a screwdriver, and then push and
turn the locking screw clockwise
to the locked position.
When the screw has been tightened, this indicates that your scanner is locked.