Step 3: Unlocking The Scanner - Microtek Bio-6000 User Manual

Step 3: Unlocking the Scanner

Before you operate the scanner, you will need to unlock the scanner. To unlock the
scanner, follow the steps below:
1. Remove the yellow "Unlock" sticker from
2. With the scanner power off, turn the
3. Using a screwdriver, push and turn the
Locking the Scanner
To lock the scanner (for shipping and other purposes), follow the steps below:
1. Turn off the scanner.
2. Turn the scanner back on.
3. Turn off your scanner.
6 Bio-6000 User Guide
your scanner.
scanner on its side and locate the
locking screw at the bottom of the
scanner.
locking screw counterclockwise to the
unlock position.
When successfully unlocked, the screw
will push out a little, protruding slightly
from the bottom of the scanner.
When the indicators on the front of
your scanner stop blinking, use a
screwdriver, and then push and turn
the locking screw clockwise to the
locked position.
When the screw has been tightened,
this indicates that your scanner is
locked.
Unlocked
Locked