Microtek ScanMaker 1000XL Plus User Manual page 20

11. Click the Scan (or "Batch") button in the Preview window or on the scanner unit
20 ScanMaker 1000XL Plus User Guide
to start scanning.
• If ScanWizard Pro was launched from an application program, the image is
then delivered to your application, where the image can be saved, printed, or
edited.
• If ScanWizard Pro was launched in standalone mode, you will be prompted to
specify the file attributes for the scanned image after the Scan or Batch
button is pressed, such as entering the file name, specifying a folder name of
your own, etc. When you have completed the settings, press the Done/Save
button, and the scanner will automatically scan and save your image based on
your settings.