Step 3: Unlocking The Scanner - Microtek ObjectScan 1600 User Manual

Step 3: Unlocking the Scanner

1. Remove the yellow sticker at the middle of the right panel of the scanner and
locate the locking screw under.
2. Using a flat-head screwdriver, pass through a round circle at the outer shell
of the scanner and insert a hollow side of the locking screw: a) push to the
end with force, and b) turn the locking screw counterclockwise 90 degrees
to the unlock position.
When successfully unlocked, the screw will push out a little, protruding
slightly from the side of the scanner. Also, the pattern of the hollow side of
the locking screw will be turned horizontally.
Locked Unlocked
b) Turn counterclockwise
a) Push to the end with force
ObjectScan 1600 User's Manual 13