Fronius TS 65A-3 Operating Instructions Manual page 28

Image
28
Scree Description
n
04 Total active energy drawn*
1.
2. Power factor (L = inductive, C = capacit-
ive)
05 1. Total active energy drawn*
2. Frequency
06 1. Total active energy drawn*
2. Total reactive power
07 1. Total reactive energy supplied**
2. Total reactive power
08 1. Total active energy drawn**
Total apparent power
2.
09 1. Total active energy drawn*
2. Maximum demanded power (P = Peak de-
mand) that has been reached since the
last reset.
Average demanded power (dMd = de-
3.
mand), calculated for the set interval.
The value remains unchanged for the en-
tire interval. It is "0" in the first interval
after the start.
10 - Not used