Multi-Meter System - Fronius Gen24 Inverter - Fronius TS 65A-3 Operating Instructions Manual

Example 2:
Multi-meter sys- If several Fronius Smart Meter TS are installed, a separate address must be set
tem - Fronius for each (see
GEN24 inverter The primary meter is always assigned address 1. All the other meters are
numbered consecutively with the address range from 2 to 14. Different Fronius
Smart Meter power categories can be used in combination.
IMPORTANT!
Max. Use 7 secondary meters in the system. To avoid interference, it is recom-
mended to install the terminating resistors according to chapter
terminating resistor
Location of the primary meter in the consumption branch. *Terminating resistor R 120 Ohm
26
Input Battery
Setting the address on the Fronius Smart Meter TS
on page 21.
Quantity
Fronius
Primary
Ohmpilot
meter
1
0
0
0
Quantity
Secondary
meter
3
4
2
1
on page 31).
Connecting the