Sms Command; Basic Sms Commands; Position Report; Set Interval For Automatic Timed Report - GPS Tracker TK102 User Manual

7 SMS Command

TK102 will only accept commands from a user with the correct password. Commands with wrong password are
ignored. The default password is 000000.

7.1 Basic SMS Commands

7.1.1 Position Report

To know the location of your TK102, send an SMS or make a telephone call directly to TK102 and it will report its
location by SMS.
Command: W<password>,<000>
Notes: The default password is 000000.
Example:
SMS sent: W000000,000
SMS received:
Latitude = 22 32 36.63N Longitude = 114 04 57.37E, Speed = 2.6854Km/h, 2008-12-24,01:50
To get TK102's position by another easier way:
(a) Call TK102 using your mobile phone.
(b) After listening to the ring for 10 - 20 seconds, hang up the phone.
(c) Then after 20 second, your mobile phone will receive a position SMS.

7.1.2 Set Interval for Automatic Timed Report

Description: Automatic timed reports will be sent to your mobile phone according to the time interval you set.
Command: W<password>,002,XXX
Notes: XXX is the interval in minute. If XXX=000 it will stop tracking
Example:
SMS sent: W000000,002,005
SMS received: Set Timer Ok/005
TK102 will then report its location by SMS every 5 minutes.

7.1.3 Stop Automatic Timed Report

Description: Automatic timed reports will stop once TK102 receives stop command.
Command: W<password>,002,000
Example:
SMS sent: W000000,002,000
SMS received: Set Timer Ok/000
TK102 will stop automatic timed report
For more detailed SMS commands please go to Chapter 10 - SMS Command List
- 7 -