Light And Button Functionality; Installation - GPS Tracker TK102 User Manual

Gps portable tracker
Hide thumbs Also See for TK102:
Table of Contents

Advertisement

6.2 Light and Button Functionality

Blue LED (GPS light) - indicating GPS status
On
Flashing ( every 0.1 second)
Flashing (on for 0.1 second and off for 2.9 seconds)
Flashing (on for 1 second and off for 2 seconds)
Green LED (GSM light) - indicating GSM status
On
Flashing ( every 0.1 second)
Flashing (on for 0.1 second and off for 2.9 seconds)
Flashing (on for 1 second and off for 2 seconds)
SOS Button

6.3 Installation

Read this manual before using your TK102 and check if all parts are included in the packaging box.
Ensure that your TK102 has a working SIM installed.
- Check that the SIM has not run out of credit (test the SIM in a phone to make sure it can send and receive SMS)
- Check that the SIM Lock code is turned off
- If you require the function of sending an SMS location report to the authorized phone number when it makes a call to
the TK102, please make sure the SIM installed supports displaying caller ID.
- Insert the SIM card by sliding it into the card slot with the chip module facing to the connectors on PCB.
- Put back The battery and close the cover
- Battery and Charger
Do charge the battery to capacity in 8 -12 hours for first use. Please use the battery and charger provided by the
manufacturer. This unit adopts built-in Li-ion battery, and full battery will support around 48 hours use on end. After first
use, the battery can be charged fully in 3-5hours.
Cautions:
a: For it's Li-ion battery, which contains harmful chemicals and may burst, please don't bump, puncture it violently and
keep it off fire.
b: Please charge the battery in time to keep it working normally.
Mini USB Port
Connect the tracker with computer by USB cable for configuration and reading stored waypoints data. You need to
install the driver - PL-2303 Driver Installer - for using the USB cable.
Refer to <GPS Tracker Parameter Editor> for configuration and <GPSLog User Guide> for reading stored
waypoints.
One or more inputs are active
The unit is being Initialized
TK102 has a GPS fix
TK102 has no GPS fix
One call is coming in/ one call is being made
The unit is being Initialized
TK102 is connected to the GSM network
TK102 is not connected to the GSM network
Press it to send SMS alert
- 6 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents