Sms Command List - GPS Tracker TK102 User Manual

10 SMS Command List

(Remarks: ****** is user's password, and the default password is 000000)
Description
Get current location
Change user's password
Set interval for automatic
timed report
Set preset phone number for
SOS button
Set low power alert
When TK102 voltage is lower
than the preset value, it will
send one low power alert to
the SOS preset number.
Set over speed alert
When TK102 speeds higher
than the preset value, it will
send an SMS to the SOS
preset number.
Set Geo-fence alert
When the TK102 moves out of
preset scope, it will send one
Geo-fence SMS to the SOS
preset number.
Command
W******,000
W******,001,######
W******,002,XXX
W******,003,F,P,T
W******,004,X
W******,005,XX
W******,006,XX
Remarks
Get current location of TK102
****** is old password
###### is new password
XXX is the interval in minute. If XXX=000
it will stop tracking
F=0, to turn off this function;
F=1, to send SMS;
As SOS button is linked to IN1, P=1.
T: Preset phone number. Max 16 digits
X (voltage preset value)
=0 , to turn off this function
=1, <3.3V send SMS alert
=2 , <3.4V send SMS alert
=3 , <3.5V send SMS alert (default )
=4 , <3.6V send SMS alert
=5 , <3.7V send SMS alert
XX (the preset value of speed)
=00 , to turn off this function
=[01, 20] (unit: 10Km/h)
For example, W000000,005,08, it will sent
alert when it is over 80Km/h
XX ( preset distance to original place )
=00, close
=01, 30m
=02, 50m
=03, 100m
=04, 200m
=05, 300m
=06, 500m
=07, 1000m
=08, 2000m
- 11 -