Advertisement
7800 and 8200 Series Mortise Lock
Used with Sectional Trim and V Series Indicators
Installation Instructions
1
Tools Required
#2 & #3 Phillips
head screwdrivers
2
Indicator Variants
Depending on function and option ordered, indicators are provided in the following variations, these instructions detail how
to install with cylinder, however other variations follow similar instructions. (Figure 1)
Contact factory for any questions.
Cylinder - For
installation
on inside or
outside of
door.
3
Lock set configuration
To set function of multi-function lock or to re-hand, see instructions on lock body.
1-800-727-5477 • www.sargentlock.com
Copyright © 2019, 2020, 2021, 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in
whole or in part without the express written permission of SARGENT Manufacturing Company is prohibited. Patent
pending and/or patent www.assaabloydss.com/patents.
1/8" Allen
Flat blade
Wrench
screwdriver
Coin Turn - For
Thumbturn -
installation
For installation
on outside of
on inside of
door.
Figure 1
3/32" Drill bit
No input /
blank - For
installation
on inside or
door.
outside of
door.
2
T-20 Torx Screw
with Tamper Pin
Driver
A8257E 4/22
Advertisement
