Tools Required; Indicator Variants; Lock Set Configuration - Assa Abloy Corbin Russwin MP6600 Series Installation Instructions Manual

MP6600 Series Multi-Point Lock
Used with VN1 Escutcheon Trim and V Series Indicators
Installation Instructions
1

Tools Required

2

Indicator Variants

Depending on function and option ordered, indicators are provided in the following variations, these
instructions detail how to install with cylinder, however other variations follow similar instructions. (See
Figure 1 below)
• Contact factory with questions.
Cylinder - For
installation on inside or
outside of door.
3

Lock set configuration

To set function of multi-function lock or to re-hand, see the instructions on the lock body.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Thumbturn - For
Coin Turn - For
installation on inside of
installation on
door.
outside of door.
No input/blank - For
installation on inside
or outside of door.
3
Figure 1
FM556 08/20