System Configuration; Figure 59 Activating/Removing A Firmware Image - Quantum DX Series User Manual

Figure 59 Activating/
Removing a Firmware
Image
System
3
Configuration
An
Successful Upload
been uploaded. Click
5 Click to activate the new firmware image or
Activate
remove the firmware image from the system (see
A page indicates the firmware has been either activated or
Results
removed.
6 Click to return to the
OK
The DX-Series system will use the new firmware image the next time the
system is rebooted (see
This option allows the current configuration to be downloaded to the
administrator's system as a single file. The system configuration file
contains all of the configuration information entered by the DX-Series
system administrator including:
• IP configuration
Quantum DX-Series User's Guide
Chapter 3 DX-Series Remote Management
page displays indicating that the firmware has
to continue.
Ok
page.
Utilities
Rebooting the DX-Series
Utilities
to
Remove
figure 59).
System).
89