Set A Paging Key - Alcatel-Lucent M8 User Manual

X new voice
message(s)
or Enter
You can use the menu to access voicemail:
3.32 Defining a hotline number
If configured, the hotline number is dialed immediately or after a defined time delay when you pick up the
handset or press the handsfree button or the Call button of the headset.
Refer to the following requirements to configure a hotline number:
The phone is in idle state:
Menu
Features
Hotline
Number
Delay
Switch or
or Save
Follow the same procedure to deactivate the Hotline feature. This feature can also be configured on the Web
Based Management page.
3.33 Multicast paging
Multicast Paging allows you to broadcast instant audio announcements to users who are listening to a
specific multicast group on a specific channel. The phone supports 25 channels.
Note: All IP phones in the multicast paging grup must be deployed in the same subnet since a broadcast
is used. The phone can only send/receive broadcasts to/from the listened channels. Other channels'
broadcasts will be ignored automatically by the IP phone.
3.33.1

Set a paging key

You can set a Multicast Paging key for a paging group, which allows you to send announcements quickly
on the idle screen.
The phone is in idle state.
M8 User Manual 1.0
displayed on the screen.
Use up-down and "OK" navigation keys to access voicemail.
The number of new voice messages is displayed for each registered account. Select the
relevant account.
Call your voicemail. Follow the voice guidance to listen to your voice messages from the
voicemail server.

Menu
Press the Menu soft key to access the Main Menu.
Use up-down and "OK" navigation keys to select: Features.
Use up-down and "OK" navigation keys to select: Hotline.
Enter a hotline number.
Enter the time delay in seconds before the hotline number is dialed. The hotline
number is immediately dialed if the delay is not configured.
Enable the Hotline feature
Validate your choice
End the settings.

Voicemail View Voice Messages.
45/79