Opening The Dialer; Dialing The Phone Number; Calling By Name - Alcatel-Lucent M8 User Manual

This section describes how to make a call. We provide different method to open the dialer before calling your
contact.
3.3.1

Opening the dialer

Use one of the following methods:
3.3.2

Dialing the phone number

Use one of the following methods:
Use one of the following methods:
Call
# or *
Depending on the system, after dialing the number, the call can be started automatically after a delay without
action.
When you are in handsfree mode, you can take the call at any time on the handset by offhooking it. Or press the
Headset key to switch the audio from handsfree to headset or from headset to handsfree.
To make an external call, dial the outside line access code before dialing your contact number. The call will start
after a timeout of approx. 10 seconds if there is no action taken after dialing. If you are using multiple SIP
accounts on your phone, you can choose an account to make the call.
3.3.3

Calling by name

M8 User Manual 1.0
Enter the number directly on the dialpad.
Offhook the handset.
Press the Handsfree key.
If a programmable key for SIP account is set on the homepage, press the SIP account
key to access the dialer.
Open the dialer
Enter the number
Select the corresponding contact from the dial out list.
Press the Dial key. Make the call with the active device: handset if offhooked, headset if
connected, otherwise in handsfree mode.
Press the OK key to make a call.
Press the Call key to make a call.
If defined in the phone settings, you can use these keys to initiate the call.
23/79