About Engo Smart App (General Information) - ENGO CONTROLS E10W230WIFI Full Manual

4.3 About ENGO Smart app (general information)

The heart of the ENGO system is its ENGO Smart app. It allows you to combine the functionality of many devices in an accessible way. It allows
you to connect to devices marked with the logs „Powered by Tuya" or „Powered by Tuya: Intelligence Inside".
Remote control is carried out via the Tuya cloud, which connects to the user's phone, so that the user of the device does not have to rent a server
room or write software for it. Why can't the phone connect directly to the device? Such a necessity is due to the fact that it would require an appropriate
router with a fixed IP address, so the cellular network will not work, and even with such a router, its configuration would be quite complicated and
would require some sacrifices as regards the security of the link, because you would have to allow the devices from outside the house connected to it.
The first connection and configuration can be performed manually according to the instructions displayed in the app, but there is also an option
to automatically scan for configurable devices. After that, the device automatically connects with the app and is visible on the list.
Each of the owned devices can be optionally assigned to the room in which it is located, which makes it easier to find out when our home is
truly intelligent. All devices, regardless of whether they belong to specific rooms, are assigned to one of the houses that can have more than one. This
assignment is not pointless, as the app knows where the device is located and can provide information about the current weather.
Thanks to this data, you can create so-called scenes, i.e. automate repetitive activities and thus save time. For example, you can set in the app
that if the temperature drops below fifteen degrees, the heating will turn on or that the light will come on when the sun goes down.
But what if you need to automate something independent of the weather? The ENGO app also satisfy such a need, and it does so by using scenes
that can be run with a single tap, or scenes that trigger when the state of one of the added devices changes. Example: we are leaving the house and we
want the power to be cut off from the smart socket to which the iron is connected, and five minutes after that, all lights in the house turn off. It can be
easily configured and started with one tap. It is similarly simple to solve the problem of turning off the light in the bedroom - if the bedside lamp is turned
on, it can be set to turn off the light in the bedroom.
COMPATIBILITY WITH TUYA DEVICES (examples):
Smart plugs
12
E10W230WIFI(E10B230WIFI) - FULL MANUAL
Smart bulbs Cameras Doorbells