Cleaning And Maintenance; Technical Informations - ENGO CONTROLS E10W230WIFI Full Manual

11. Cleaning and maintenance

The E10 thermostat does not require any special maintenance. Do not use brushes, washers or other tools that may scratch the surface of the thermostat
for cleaning and maintenance of the surface, and do not use abrasive or foaming agents, as well as aggressive substances containing acids, chlorine or
its compounds, solvents or bleaching agents, as this may damage the thermostat. Always clean the display and buttons with a damp, soft cloth. Plastic
surfaces can also be cleaned with colorless, mild cleaning agents. Do not spray cleaner directly onto the device. After washing the surface, you can gently
polish it with a soft, dry cloth. There are no user serviceable / replaceable parts inside. Service or repair may be performed only by an authorized ENGO
Controls service.

12. Technical Informations

Power supply
Max. load
Temperature range
Display temperature accuracy
Control algorithm
Communication
Input S1 – S2
Control output
IP class
Dimensions [mm]
86 mm
230V AC 50 Hz
3(1)A
5,0°C to 45,0°C
0,1°C
TPI or Hysteresis (from ±0.1°C to ±0.5°C)
WiFi 2,4 GHz
Floor temperature sensor
or Air temperature measurement
COM / NO (volt free)
IP30
86 x 86 x 39 mm
(14 after mounting in a Φ60 mm box)
86 mm
E10W230WIFI(E10B230WIFI) - FULL MANUAL
61