Create Group - ENGO CONTROLS E10W230WIFI Full Manual

8.5.6 Create group

Simultaneous control of few E10 thermostats will be available after creating a new group and assigning the selected thermostats to this group. Then,
a virtual master thermostat appears on the desktop, which allows you to overwrite all parameters in the grouped thermostats.
For example: If you set the virtual thermostat to manual mode, then each thermostat in this group will switch to manual mode. See the steps below on
how to group multiple thermostats.
1
Enter the thermostat interface.
4
Select the devices you want to assign
to the group.
52
E10W230WIFI(E10B230WIFI) - FULL MANUAL
2
Click the pencil icon in the top
right corner.
5
Click „Save".
3
Select „Create Group".
6
Name the group and confirm „Save".