About Engo; Mobile Device Requirements; About Engo Smart App (General Information) - ENGO CONTROLS EONEBATW Full Manual

Zigbee smart thermostat, li-ion battery

Hide thumbs

Table Of Contents

Table of Contents

5. About ENGO

5.1 Mobile device requirements

FOR A MOBILE DEVICE WITH ANDROID:

Android version 5.0 or higher

FOR A MOBILE DEVICE WITH IOS SYSTEM:

IOS version 9.0 or higher

5.2 About ENGO Smart app (general information)

The heart of the ENGO system is its ENGO Smart app. It allows you to combine the functionality of many devices in an accessible way. It allows you to

connect to devices marked with the logs „Powered by Tuya" or „Powered by Tuya: Intelligence Inside". Remote control is carried out via the Tuya cloud,

which connects to the user' s phone, so that the user of the device does not have to rent a server room or write software for it. Why can't the phone connect

directly to the device? Such a necessity is due to the fact that it would require an appropriate router with a fixed IP address, so the cellular network will

not work, and even with such a router, its configuration would be quite complicated and would require some sacrifices as regards the security of the link,

because you would have to allow the devices from outside the house connected to it.

The first connection and configuration can be performed manually according to the instructions displayed in the app, but there is also an option to auto-

matically scan for configurable devices. After that, the device automatically connects with the app and is visible on the list.

Each of the owned devices can be optionally assigned to the room in which it is located, which makes it easier to find out when our home is truly intelli-

gent. All devices, regardless of whether they belong to specific rooms, are assigned to one of the houses that can have more than one. This assignment is

not pointless, as the app knows where the device is located and can provide information about the current weather.

Thanks to this data, you can create so-called scenes, i.e. automate repetitive activities and thus save time. For example, you can set in the app that if the

temperature drops below fifteen degrees, the heating will turn on or that the light will come on when the sun goes down.

But what if you need to automate something independent of the weather? The ENGO app also satisfy such a need, and it does so by using scenes that

can be run with a single tap, or scenes that trigger when the state of one of the added devices changes. Example: we are leaving the house and we want

the power to be cut off from the smart socket to which the iron is connected, and five minutes after that, all lights in the house turn off. It can be easily

configured and started with one tap. It is similarly simple to solve the problem of turning off the light in the bedroom - if the bedside lamp is turned on, it

can be set to turn off the light in the bedroom.

ENGO Wi-Fi

E901WIFI

EIRTXWIFI

COMPATIBILITY WITH TUYA DEVICES (examples):

Smart plugs

EONEBAT FULL MANUAL

Compatibility of devices in the ENGO Smart application:

E10W230WIFI/E10B230WIFI

Smart bulbs

EGATEZB

ECB62ZB