Platen Cleaning - MIMAKI JV330 Series Operation Manual

4
Clean the jam sensor detecting plate.
• Clean the jam sensor detecting plate underside at the left and right sides of the carriage.
• Wipe off any ink and dust adhering using a cleaning stick moistened with maintenance liquid. Wipe
off the maintenance liquid. Make sure none remains.
5
Once cleaning is complete, close the cover, then press the [ENTER] key.

Platen Cleaning

Continuing to use the dirty platen will prevent proper feeding of the media. It will also cause dried ink and
attached dust to rub against the head nozzle surface and lead to print defects (e.g., nozzle clogging,
deflection).
• Turn off the main power supply and unplug the power cable before carrying out maintenance.
• Do not allow liquids to get inside the product. Otherwise there is a risk of failure, electric shock,
or fire.
• The grooves in which the media holder slides and the media is cut are susceptible to dust
accumulation. Remove any debris carefully.
• For heavy soiling, wipe using a soft cloth soaked in dilute detergent and thoroughly wrung out.
169
Chapter 7 Maintenance
7