Gases & Vapors; Hot Surfaces; Accumulated Liquid; Dirt And Scattered Objects - Flowserve SIHI dry Standard M Series Instruction & Operation Manual

dry dry
dry dry Standard Standard Standard Standard M Series Dry Running Vacuum Pump
SIHI
Issue Date: November 21, 2016
2.3.2 Gases & Vapors
2.3.3

Hot Surfaces

2.3.4

Accumulated Liquid

2.3.5

Dirt and Scattered Objects

2.3.6

Noise

Copyright: FLOWSERVE SIHI Pumps
Danger! To life due to gases and vapors.
Therefore:
Ensure that the room is adequately ventilated.
When assembling and dismantling the device, ensure
that hot, toxic and/or corrosive mediums do not
escape from open pipes.
Secure shut-off devices against unauthorized
actuation.
Warning! Risk of burning due to hot surfaces.
Therefore:
Before starting any activity, ensure that all
components are cooled down to the ambient
temperature.
Wear protective work clothing and safety gloves
when working near hot components.
Surfaces of inlet, outlet pipes and pump casing may be hot.
The operating company of the device must ensure that the
corresponding sign is affixed.
Warning! Risk of slipping due to accumulated liquid.
Therefore:
Wear protection shoes.
Remove leaked liquids and dispose them of properly.
Warning! Risk of tripping due to dirt and scattered objects.
Therefore:
Keep the work area clean.
Remove the objects that are no longer required.
Mark the tripping points using the yellow-black
marking tape.
Warning! Risk of impairment due to noise.
Therefore:
Wear ear protectors compliant with the prevailing
regulations.
14
Flowserve US Inc.
Rev 1