Extraction Tips; Correct Extraction; Under Extraction - Sage Bambino Plus User Manual

Hide thumbs Also See for Bambino Plus:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

PAGE HEADER.....
OPERATING YOUR NEW APPLIANCE

EXTRACTION TIPS

A great espresso is about achieving the perfect balance between sweetness, acidity, and bitterness.
The flavour of your coffee will depend on many factors, such as the type of coffee beans, degree of roast
freshness, coarseness or fineness of the grind, dose of ground coffee and tamping pressure.
Experiment by adjusting these factors just one at a time to achieve the taste of your preference.

CORRECT EXTRACTION

• Flow starts after 8-12 secs
• Flow slow like warm honey
• Crema is golden brown with a fine
mousse texture
• Espresso is dark brown
AFTER EXTRACTION
REMOVE USED
GRINDS
Used grinds will form
a coffee 'puck'. If the
puck is wet, refer to
the 'Under Extraction'
section.
RINSE FILTER
BASKET
Keep the filter basket
clean to prevent
blockages. Without
ground coffee in the filter
LOCK TIGHT
basket, lock the
portafilter into the
machine and run hot
water through.

UNDER EXTRACTION

• Flow starts after 1-7 secs
• Flow fast like water
• Crema is thin and pale
• Espresso is pale brown
• Tastes bitter/sharp, weak and watery
SOLUTIONS
EXPERIMENT WITH GRIND:
• Grind needs to be finer
for a slower extraction.
• Ensure you are controlling dose
with the Razor™.
Adjust & re-test
Tamp using 15-20kgs
of pressure. The top
edge of metal cap on the
tamper should be level
with the top of the filter
basket AFTER tamping.
Trim the puck to the
ALWAYS TAMP TO LINE
right level using the
Razor
precision dose
Adjust & re-test
trimming tool.
OVER EXTRACTION
• Flow starts after 13 secs
• Flow drips or not at all
• Crema is dark and spotty
• Espresso is very dark brown
• Tastes bitter and burnt
SOLUTIONS
EXPERIMENT WITH GRIND:
• Grind needs to be coarser
for a faster extraction.
• Ensure you are controlling dose
with the Razor™.
Adjust & re-test
Tamp using 15-20kgs
of pressure. The top
edge of metal cap on the
tamper should be level
with the top of the filter
basket AFTER tamping.
Trim the puck to the
ALWAYS TAMP TO LINE
right level using the
Razor
precision dose
Adjust & re-test
trimming tool.
EN
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ses500

Table of Contents