Troubleshooting - STEINEL L 830 LED iHF Manual

12. Troubleshooting

Malfunction Cause
Sensor-switched light ■ Fuse has tripped,
without power not switched ON,
break in wiring
■ short circuit
Sensor-switched light will ■ Twilight setting in
not switch ON night-time mode
during daytime
operation
■ Mains switch OFF
■ Fuse has tripped
■ detection zone not
correctly adjusted
Sensor-switched light will ■ Continued movement
not switch OFF within the detection
zone
Sensor-switched light ■ Night light selected
will not switch OFF
completely
Sensor-switched light ■ Wind is moving trees
switching ON when it and bushes in the
should not detection zone
■ Cars in the street are
detected
Sensor-switched light ■ Large metal objects,
switches ON and OFF such as cars or metal
in an uncontrolled manner walls, in the detection
zone
Remedy
■ Activate, change fuse,
turn ON mains switch,
check wiring with
voltage tester
■ Check connections
■ Set twilight via app or
control dial
■ Switch ON
■ Activate, change fuse,
check connection if
necessary
■ Set reach via app or
control dial
■ Check detection
zone and readjust if
necessary
■ Night light control dial
set to "0 min"
■ Change detection
zone
■ Change detection
zone
■ Change detection
zone
■ e.g. park car
somewhere else
- 40 -