Technical Specifications; Troubleshooting - STEINEL L 800 LED iHF Quick Start Manual

12. Technical specifications

Dimensions ( H × W × D ) 88 × 230 × 145 mm
91 × 230 × 145 mm
260 × 230 × 145 mm
Material Light enclosure:
Light diffuser:
Power supply 220 – 240 V, 50/60 Hz
Output 10 W / 611 lm / 61 lm/W
12.5 W / 858 lm / 71.5 lm/W (L 810 LED iHF / L 810 LED iHF Connect)
12.5 W / 858 lm / 71.5 lm/W (L 820 LED iHF / L 820 LED iHF Connect)
Power factor 0.89
Colour temperature 3000 K ( warm white )
LED life expectancy 50,000 hours
( L70B10 to LM80 )
Angle of coverage 160° with Sneak-by guard
Detection reach 1 – 5 m ( radial )
Twilight setting 2 – 2000 lux
Time setting 5 s – 15 min
Basic light level 0 or 10%, soft start ( optionally via Smart Remote )
Permanent light selectable ( 4 h )
IP rating IP 44
Protection class II
Temperature range -20°C to +50°C
Bluetooth frequency 2.4 – 2.48 GHz (L 800 / L 810 / L 820 LED iHF Connect)
Bluetooth transmitter power 5 dBm / 3 mW (L 800 / L 810 / L 820 LED iHF Connect)
Frequency iHF 5.8 GHz
Transmitter power iHF < 1 mW
(L 800 LED iHF / L 800 LED iHF Connect)
(L 810 LED iHF / L 810 LED iHF Connect)
(L 820 LED iHF / L 820 LED iHF Connect)
aluminium
plastic
(L 800 LED iHF / L 800 LED iHF Connect)
- 16 -

13. Troubleshooting

Malfunction Cause
Sensor-switched light without ■ Fuse has tripped,
power not switched ON,
break in wiring
■ Short circuit
Sensor-switched light will not ■ Twilight control set to night
switch ON
mode during daytime operation
■ Mains switch OFF
■ Fuse has tripped
■ Detection zone not correctly
adjusted
Sensor-switched light will not ■ Continued movement within the
switch OFF
detection zone
Sensor-switched light will not ■ Basic lighting level selected
switch OFF completely
Sensor-switched light switching ■ Wind is moving trees and
ON when it should not
bushes in the detection zone
■ Cars in the street are detected
Large metal objects, such ■ Change detection zone
as cars or metal walls, in the
detection zone
LED floodlight is not shown in ■ Incorrect region selected
the Bluetooth listing
Forgotten password?
App won't start ■ Location is not activated
Settings for LED floodlight are ■ LED floodlight is not declared as
greyed out group master (slave mode)
No Bluetooth LED floodlight ■ LED floodlight is not in reach
found
■ Bluetooth is deactivated on
smartphone
No connection being set up from ■ Smartphone too close to device
smartphone to LED floodlight
■ Smartphone not compatible
with app
■ App version not up to date
Remedy
■ Activate, change fuse, turn ON
mains switch, check wiring with
voltage tester
■ Check connections
■ Reset
■ Switch ON
■ Activate, change fuse, check
connection if necessary
■ Readjust
■ Check detection zone and
readjust if necessary
■ Turn programme selector dial to 0
■ Change detection zone
■ Change detection zone
■ e.g. park car somewhere else
■ Settings
 Region EU/Region US
■ After entering wrong password:
"Reset password" button; switch
power supply OFF and back ON
again within 10 minutes; then
re-enter password
■ Activate location in smartphone
settings
■ Set master floodlight
■ Declare LED floodlight as master
■ Check whether Bluetooth is
activated on smartphone or
reduce distance to the product
■ Re-start search
■ Distance to LED floodlight at
least 1.5 m
■ Use different smartphone
■ Update Smart Remote app in
app store
- 17 -
GB