Vehicle Connection; Connection Procedure - Xtool H6 EB User Manual

Shenzhen Xtooltech Co., Ltd

3. Vehicle Connection

3.1. Connection procedure

To get full and right diagnosis function, user needs to connect the H6 EB tablet and
vehicle properly.
①: H6 EB Tablet
②: VCI box (communication with the tablet by wire or Bluetooth connection, and connect with
③⑤ components to vehicle OBD-II port)
③: Main cable
④: Diagnosed vehicle
⑤: OBDII-16 Adapter (Select other adapters when the diagnostic port is a non-standard OBDII
16pin connector)
Connection step:
1. Turn on the car ignition switch, and H6 EB Tablet
2. Choose proper OBD II adapter, and connect it with the main cable and
vehicle
3. Connect the VCI diagnostic box to the main cable, and wait for 5 seconds for
Bluetooth to connect the tablet successfully
4.
Open diagnosis app, and select the function for vehicle fault diagnosis
(Vehicle connection diagram)
11