Table of Contents
Advertisement
Various Settings
en
External Output Settings
Use external output settings to select an external device to connect to this product.
1
Press
2
Press
Enters the settings mode.
3
Select
4
Select the external output port using
then press
The current setting is displayed (RS-232C is the factory setting).
Press the button to switch the output signal between
out.Pr (printer) and out.rS (RS) each time the button is pressed.
*See pg. 24 for the RS-232C output format.
*Be careful, because aggressively moving the cable that connects the product and the optional device during
measurement may result in incorrect values.
22
.
blinks, then
is displayed.
while nothing is on the platform.
using
or , then press
.
(continued)
.
or ,
Connected to a computer
Connected to a printer
Advertisement
Table of Contents
