Table of Contents
Advertisement
6
Select the day using
The currently set day is displayed.
*The flashing section can be changed from 1 to the
number of the last day in the set month.
7
Select the hour using
The currently set hour is displayed.
*The flashing section can be changed from 0 to 23.
8
Select the minute using
Saves the set time and finishes.
The currently set minute is displayed.
*The flashing section can be changed from 0 to 59.
Ready for measurement once
the screen.
Note
Press
to cancel setting or turn off the display. The power is forced off.
When you press
in
When the battery is low, the date and time may be tracked incorrectly. Should this occur, set the date and time again.
or
, then press
or
, then press
or
, then press
is displayed on
being displayed,
.
.
.
is displayed if the clock IC battery is low.
en
21
Advertisement
Table of Contents
