Table of Contents
Advertisement
Caution
Do not jump on the equipment.
Do not lean against the equipment.
Do not tilt the equipment.
Do not use this equipment near other products that emit electromagnetic waves.
Do not insert fingers into any of the gaps or holes.
Do not apply force to the display.
The screen may break and cause injury.
Prohibited
Do not use the monitor if you have any kind of wound or inflammation on any part of your body
that comes into direct contact with the monitor.
Do not use rechargeable batteries.
Do not use old batteries together with new batteries, or a mix of different types of batteries at the same time.
Doing so may cause battery fluid to leak or the batteries to become excessively hot and rupture, resulting in
damage to the equipment or injury.
Avoid using on subjects with allergies to metals.
Allergic reactions may be caused by the stainless steel used in the electrodes of this equipment.
Assist persons with disabilities.
Another person should assist persons with disabilities who may not be able to take a measurement alone.
Clean the equipment after each use.
Wipe off the equipment if dust accumulates or it becomes dirty.
Stand clear of the subject during measurement to ensure accuracy.
Continually monitor both the subject and the equipment for anomalies.
If an anomaly in the subject or equipment is discovered, take appropriate action, such as stopping the
equipment, while ensuring the safety of the subject.
Be sure that the batteries are inserted in the corrected orientation.
If the batteries are inserted incorrectly, fluid may leak from the batteries and damage the floor.
If you do not intend to use this equipment for a long period of time, or if you always use AC adapter,
remove the batteries before storage.
Required
Use the included AC adapter (ATM012T-W090V).
Unplug the AC adapter from the equipment when moving it.
Interpretation of analysis results (e.g. evaluation of measurements and formulation of exercise
programs based on results) must be performed by a professional.
Weight loss measures and exercise based on self-analysis could be harmful to your health.
Always follow the advice of a qualified professional.
This equipment is designated a Class B IT device (mainly for systems intended to be used in indoor
environments) and is CE (EMC) certified, but it may affect devices that are sensitive to
electromagnetic waves.
If connecting a computer or peripheral devices to this equipment, please use devices complying with
IEC60601-1 (EN60601-1). Power must be supplied from a medical isolation transformer for IEC60950
(EN60950) devices. Keep a distance of 1.5m between units during operation. Failure to do so may cause
electric shock to subjects or malfunction.
The data provided by this equipment should be interpreted by a licensed professional.
This equipment may only be operated by healthcare professionals.
en
5
Advertisement
Table of Contents
