Table of Contents
Advertisement
Regular Maintenance
TANITA recommends that each facility conduct periodic checks of each unit.
1. Check the following at least daily:
• Check that the unit is on a stable and level surface, e.g. on firm flooring, not on a thick carpet
• Date and time settings
2. Visually inspect the following at least weekly:
• Inspect the display for any damage or contamination
• Inspect all cables, cords, and connector ends for damage or contamination
• Inspect all safety-related labeling for legibility
• Inspect all accessories (electrodes, etc.) for wear or damage
3. Visually inspect the following at least monthly:
Required
• Mounting screws
Update settings, replace items, or call for service as necessary according to the results
of the visual inspections. Do not use the unit if you see any signs of damage.
Equipment that has been damaged must be checked for proper operation by qualified
personnel before using again.
Do not wipe the equipment with corrosive chemicals (benzene, cleaner, etc.).
Please use a mild detergent to clean the equipment.
en
7
Advertisement
Table of Contents
