Table of Contents
Advertisement
Canceling the Preset Tare Temporarily
The set preset tare can be canceled temporarily.
1
Press
while a preset tare weight is being subtracted
and nothing is on the platform.
The set preset tare weight is canceled and the display returns
to
.
Note
To completely cancel it, change the preset tare weight to
To change the tare weight, turn off the power and then turn it on again.
You can use preset mode again by pressing
Changing the Preset Tare Weight
1
Press
while a preset tare weight is being subtracted
and nothing is on the platform.
The preset tare weight can be changed from the current setting.
▶"Net(PT)" and blink.
2
Change the preset tare weight using
then press
.
*Preset tare weight can be changed in 0.1k increments.
Note
to cancel setting or turn off the display. Pressing before
Press
saving contents to memory.
*The tare and preset tare functions cannot be used at the same time.
(see "Changing the Preset Tare Weight").
.
or
,
causes the power to turn off without
en
19
Advertisement
Table of Contents
