Table of Contents
Advertisement
Preparations Before Use
How to Install Correctly
Use the product on a firm, level and stable surface.
Do not install in a location with direct sunlight, near a heater or directly contacted by air conditioning.
Avoid using in locations with extreme changes in temperature.
Do not install in locations with high humidity or moisture.
Note
Installing on rugs, carpets, tatami, etc., may result in incorrect measurement.
Installation in locations with extreme vibration may result in incorrect measurement.
Checking the Level Gauge
Use the product on a firm, level and stable surface.
Install on a level surface to ensure correct weight measurement.
Rotate the four adjustable feet until the bubble in the level gauge is
centered.
Note
Install the product on a firm, even surface. If the adjustable feet are not used to achieve even leveling, the product may fall
over during measurement or it may result in incorrect measurement.
How to Connect
Connecting the platform and the control unit
Use the connecting cable to connect the platform and the control unit.
*When connecting the platform and the control unit, hold the
connector slightly on the lower side (not the moving part) and
alight the white circle to connect (Fig. 1).
*When removing the connector from the platform, Pull the moving
part of the connector out (toward the arrow) (Fig. 2).
Looking look at the meter from directly above it
Black frame
Bubble
Moving part
Connector
Connecting cable
(Fig. 1)
(Fig. 2)
DC jack for AC adapter
AC adapter
en
11
Advertisement
Table of Contents
