Table of Contents
Advertisement
Troubleshooting
en
If you think your equipment is malfunctioning, check the following before ordering repairs.
Issue
Nothing is displayed
when
is displayed
Characters quickly
disappear after they
are displayed.
Blinking
The display won't lock
is displayed
during measurement
is displayed
when
is displayed
when
26
is pressed
is pressed
is pressed
Items to check
When using the AC adapter
Makes sure the AC adapter plug and DC jack are
connected and the plug is connected to an outlet.
When using batteries
The batteries may be dying. Insert new batteries.
Make sure the
and
on the batteries are pointed in the
correct direction inside the battery box.
The batteries are dead. Promptly replace them.
The batteries are dead. Promptly replace them.
( may not always be displayed when the remaining
battery is low)
Measurement accuracy may be affected in locations with heavy
vibrations. Change the location of the product and try again.
Is the Weight Lock Mode turned off?
The maximum weight of 200k has been exceeded.
Remove everything from the platform.
The platform and the control unit are not connected.
Reference
page
12
12
12
11
16
27
11
Advertisement
Table of Contents
