Preparation For Operation - Sammic UX-40 User Manual

Ultra UX | Operation
3.1

Preparation for operation

1) Before turning on the machine, check the level o f
detergent and rinse aid in the bottles.
2) Open the door/dome and check that all compo-
nents are in good condition and properly installed:
– Filters.
– [Models without drain pump]
– Washing arms (upper and lower).
3.2 Main operating elements
Fig. 2: Control panel and buttons with LEDs
1
3
1 ON/OFF button
2 START button
Fig. 3: L CD Display
j
i
a
a Program/cycle symbols
b Section for text/time
c Settings section
d Symbols options enabled
e Indicator/warning symbols
Buttons
ON/OFF button
• M ain functions: Turns the machine on and off.
When the machine is turned on, the display turns
on.
• L ED colours:
– Red. Machine connected and on standby.
– W hite: machine on.
8
Overflow.
2
4
3 PROG button
4 OPTIONAL Button
g
e
h f
c
b d
f Progress bar
g "Machine ready" arc
h Machine water fill blade
i Boiler heating blade during prepara-
tion
Tank heating blade during prepara-
j
tion.
START button
• M ain functions:
– Start of the wash cycle.
– Co nfirmation of setting parameters.
– W ith the door open, activate the "auto start" option.
• L ED colours:
– White: in setting functions.
– O range: warming up.
– G reen: machine ready.
– B lue: cycle in progress.
PROG button
• M ain functions: selection of the washing pro -
gramme.
• L ED colours: white. While the button led is on, the
display shows the time and temperatures of the tank and boiler
corresponding to the selected cycle. [
selection p. 9 ]
OPTIONAL Button
• M ain functions:
– With the door closed, the "wash plus" function is
activated. This function extends the selected cycle by
30 seconds
– [ UX-40 Models] It activates the cold rinse function in the
glassware cycles with the door open. This function rinses
for a few seconds with cold water after the standard rinse.
• L ED colours:
– White: access to the settings section.
LCD display indicators/warnings
Icon Indication/warning
Tank temperature and washing process.
Boiler temperature and rinsing process.
Machine ready. It switches on when the tank has reached
the setpoint temperature.
Settings section: Indicates that the machine is in the operat-
ing parameter settings mode.
Pause: activated when the door is opened during the cycle or
when the cycle is extended due to activation of the
THERMAL LOCK function or an automatic regeneration
cycle.
[C models] Also activated if the boiler is not yet completely
filled when the rinse starts
Energy saving mode: After 20 minutes without running a cycle,
the boiler setpoint temperature is lowered until the PROG
or OPTIONAL
buttons are pressed.
THERMAL LOCK: activated when the boiler has not yet
reached the setpoint temperature when the rinse starts.
Regeneration:
⇒[ D Models]
Indicates that the resin regeneration cycle of the
descaler is required.
⇒[ CD Models]
Indicates that regeneration is being performed.
[CD models] Low salt indicator. Add salt to regenerate the res-
ins in the descaler.
Error or fault warning.
▶ 3.4.2
Program
User's manual — 2900455/0